Basket
£0.00
Magnetglaze & Magnetglaze Extreme Secondary Glazing
Magnetglaze is a cost-effective secondary glazing product that is easy to install with simple tools. Steel tape is stuck to the window surround and magnetic tape to a glazing sheet so the sheet clips onto the steel to create a thermal seal, which provides excellent insulation. The sheet can be instantly removed for ventilation and access.
Available in 2 sizes, Magnetglaze (13mm) and Magnetglaze Extreme (25mm) are suitable for the full range of window sizes from small to large and even those that prove particularly draughty. Magnetglaze Extreme should not need extra support, but pins may help locate the sheet, especially useful as these sheets will tend to be larger/heavier and therefore harder to handle. We DO NOT recommend use of glass with either of our magnetic secondary glazing systems.
As with the entire Easyfix Secondary Glazing Range, Magnetglaze and Magnetglaze Extreme have the potential to cut energy costs by reducing heat loss and eliminating draughts, with the added benefit of noise reduction.
Each Magnetglaze kit comprises adhesive steel and magnetic tapes that are approx 13mm or 25mm wide. These stick best if the window surface is thoroughly cleaned before use, using Surface Preparation Wipes, which are included in the 5m kits but none of the other pack combinations. Magnetglaze Bulk packs and Magnetglaze Extreme are both supplied in cardboard dispensing sleeves, making handling and storage much easier.
The white adhesive used on the magnetic strip is visible through the pane but this can be covered by Magnetglaze Finishing Trim in either Standard or Extreme variations. The standard Finishing trim has a width of 20mm whilst the Extreme version measures in at 32mm, providing a smart aesthetic finish.
Either solution provide the flexibility to joint your magnetic panels, see our Magnetglaze Sash HD add-on kits, compatible with 4mm thick sheet. For a more smart, framed effect, you can also use Magnetglaze Pro.
Nett Priced Product
Sorry but we are not able to offer discounts on these products.
Limited Stock Notice
Please note that you are attempting to order more stock than is currently available for the following products
| Product Code | Current Stock Level | Your QTY |
|---|---|---|
| Error | Error | Error |
Placing an order with items on backorder may result in a delay to your order being despatched while we wait for the outstanding stock to be fulfilled.
If you need these goods sooner then please close this modal and adjust your amounts to fit within the current availability, otherwise click the “Add all items to basket” button below to continue.
RAL Colour Codes
At Tubeway (Sales) Ltd we manufacture and stock plastic extrusions in a range of standard White colours. Specific colour requirements can be met by our colour matching service, providing almost any shade or colour requested.
| STD COLOURS | COMMENTS | OUR REF | RAL REF |
|---|---|---|---|
| White J923 | Standard stock white | W | 9003* |
| Black B296 | Standard stock black | B | Black |
| Vanilla N404 | Cream / Magnolia | V | 1015 |
| Teak N844 | Mid Brown | T | 8001** |
| Clear 0033 | Slight blue tint in strong light | C | Clear |
| Light Grey K946 | Dove Grey | D | 7047 |
| Mid Grey H435 | Dusty Grey | Q | 7037 |
| Dark Grey M873 | Basalt Grey | E | 7012 |
| Silver J192 | Silvery Grey with metallic sheen | S | 9006 |
| Red E506 | Post Box Red | R | 3020** |
| Green E316 | Apple Green | G | 6018 |
| Yellow E313 | Daffodil Yellow | Y | 1018 |
| Blue E346 | Ultramarine Blue | Z | 5002 |
| Brown N375 | Sepia Brown | H | 8014 |
| Off White M260 | Pure White (Hygienic Cladding shade) | O | 9010 |
| Grey N526 | Agate Grey | F | 7038 |
| Grey N772 | Iron grey | A | 7011 |
| Grey J622 | Mouse Grey | J | 7005 |
| Frosted D083 | Clear Frosted | n/a | n/a |
| White Frosted N989 | White Frosted | n/a | n/a |
| Cream M336 | Cream | K | BS10B15 |
| Green P117 | Reseda Green | L | 6011 |
| White N781 | Signal White | N | 9003 |
| Cream M792 | Light Ivory | M | 1013 |
| Brown N720 | Nut Brown | U | 8011* |
The colour references given are the closest found on the various standards charts, and are strictly or guisance purposes only. Please contact us for a sample of our standard colours.
*Not an exact match. Actual shade is slightly brighter than RAL chart
**Actual colour is slightly darker than RAL chart.
Delivery Info
- This website is for deliveries to UK postcodes only. If you wish to order outside the UK this may be possible but you will need to contact us for confirmation and a shipping quote. We will not ship cut sheet outside the UK
- Our delivery charges are at a flat rate for UK islands (£48 + Vat), a lower flat rate for Scottish Highlands and Northern Ireland (£32 + Vat), with all other UK mainland postcodes £16 + Vat
- The postcodes charged the higher rates are detailed below
- Next Day delivery only applies to standard UK mainland postcodes (except Isle of Wight which is a 1-2 day service). The higher rate services are all 3-5 working days due to the distance for delivery and use of ferries where applicable
- We will normally despatch within 1-2 working days of your order, although you can specify a later date as a Checkout instruction if this is more convenient for you
- At the time of despatch you will be notified by email of the delivery arrangements. Please note that consignments sent on Friday are due for delivery on the next Monday; weekends and Bank Holidays are not regular delivery days
- Your delivery service requires a signature for Proof of Delivery, although it may be possible to arrange for the goods to be left unattended in a safe place (e.g. in Porch), but you will need to give clear and straightforward instructions within the checkout Delivery section to make this arrangement. If your requirement is not possible, we may contact you to clarify how best to proceed
- Collection from our Ipswich premises may be possible by arrangement. You will need to place the order through the site, paying the delivery charge. We notify you when the items are ready, and on collection refund the delivery charge + Vat to your payment card. We regret we are unable to process orders while you wait and are generally unable to receive callers to our premises without prior arrangement
Please note – it is important to check the number and condition of your delivered items before signing for them, as they can occasionally be damaged in transit. In the event of any problem let us know promptly so we can rectify the situation. If you sign for your goods as “received in good condition” we may be unable to help if later reported damaged.
| UK Islands (£48 + Vat, 3-5 days) | Postcode Range |
| Isle of Man | IM |
| Scilly Isles | TR21-25 |
| Channel Islands | GY, JE |
| Scottish Islands | HS, IV41-51, 55-63, KA27-28, KW15-17, PA20, 41-78, PH42-44, ZE |
| HIGHLANDS and N.I (£32 + Vat, 3-5 days) | Postcode Range |
| Scottish Highlands | IV1-40, 52-54, KW1-14, PA36-38, 80, PH19-41, 49-50 |
| Northern Ireland | BT |
| OTHER UK MAINLAND (£16 + Vat, Next day) | Postcode Range |
| Isle of Wight (service is 1-2 days) | PO30-41 |
| England, Wales and Industrial Scotland | All other postcodes |
Deliveries to remote areas or involving ferries can be disrupted in extreme weather conditions. We will do all we can to complete your deliveries as soon as we can in all circumstances.
Product Enquiry
Magnetglaze & Magnetglaze Extreme Secondary Glazing
Please fill in the form below and submit your enquiry.
A member of our team will reply or contact you as soon as possible within office hours
