Please note that you are attempting to order more stock than is currently available for the following products
Product Code
Current Stock Level
Your QTY
Error
Error
Error
Placing an order with items on backorder may result in a delay to your order being despatched while we wait for the outstanding stock to be fulfilled.
If you need these goods sooner then please close this window and adjust your amounts to fit within the current availability, otherwise click the “Add all items to basket” button below to continue.
RAL Colour Codes
At Tubeway (Sales) Ltd we manufacture and stock plastic extrusions in a range of standard White colours. Specific colour requirements can be met by our colour matching service, providing almost any shade or colour requested.
The colour references given are the closest found on the various standards charts, and are strictly or guisance purposes only. Please contact us for a sample of our standard colours.
*Not an exact match. Actual shade is slightly brighter than RAL chart **Actual colour is slightly darker than RAL chart.
Delivery Info
This website is for deliveries to UK postcodes only. If you wish to order outside the UK this may be possible but you will need to contact us for confirmation and a shipping quote.
There are 4 Geographical regions we ship to, UK islands (£48 + Vat), Scottish Highlands (£32 + Vat), Other UK Mainland – Grampians & Isle of Wight (£24 + Vat) and all other UK mainland postcodes (£16 + Vat). A breakdown of which postcodes are included within each region can be found further down this page
At present we are unable to ship goods to Southern and Northern Ireland following changes to the export requirements to do so
Next Day delivery only applies to standard UK mainland postcodes. The higher rate services are all 3-5 working days due to the distance for delivery and use of ferries where applicable
We will normally despatch within 1-2 working days of your order, although you can specify a later date as a Checkout instruction if this is more convenient for you
At the time of despatch you will be notified by email of the delivery arrangements. Please note that consignments sent on Friday are due for delivery on the next Monday; weekends and Bank Holidays are not regular delivery days
Your delivery service requires a signature for Proof of Delivery, although it may be possible to arrange for the goods to be left unattended in a safe place (e.g. in Porch), but you will need to give clear and straightforward instructions within the checkout Delivery section to make this arrangement. If your requirement is not possible, we may contact you to clarify how best to proceed
Collection from our Ipswich premises may be possible by arrangement. You will need to place the order through the site, paying the delivery charge. We notify you when the items are ready, and on collection refund the delivery charge + Vat to your payment card. We regret we are unable to process orders while you wait and are generally unable to receive callers to our premises without prior arrangement
Please note – it is important to check the number and condition of your delivered items before signing for them, as they can occasionally be damaged in transit. In the event of any problem let us know promptly so we can rectify the situation. If you sign for your goods as “received in good condition” we may be unable to help if later reported damaged.
UK Islands (£48 + Vat, 3-5 days)
Postcode Range
Isle of Man
IM
Scilly Isles
TR21-25
Channel Islands
GY, JE
Scottish Islands
HS, IV41-51, 55-56, KA27-28, KW15-17, PA20, 41-78, PH42-44, ZE
Deliveries to remote areas or involving ferries can be disrupted in extreme weather conditions. We will do all we can to complete your deliveries as soon as we can in all circumstances.
Product Enquiry
Plastic Trims for 15 - 18mm Board
Please fill in the form below and submit your enquiry.
A member of our team will reply or contact you as soon as possible within office hours
About Our Plastic Trims for 15 - 18mm Board
15-18mm Board is an extremely popular board thickness for a variety of projects ranging from Shop Fits, Internal Cladding and Commercial refits.
Tubeway manufacture a the full range of plastic trims from J Section Capping, Plastic H Section for Jointing, both Internal and External Corners plus the ever popular 2 Part H Sections. Many of these Plastic trims are listed 1mm larger than the board thickness to allow for easy fitting. They typically also have a taper on the leg that allows the profile to grip the board nicely.
Plastic J Section is commonly called a number of different names, encompassing Plastic Capping, Plastic End Caps, Plastic Starter Trim, Plastic J Trim or even Plastic Board Clip. Regardless of its name it's used in the same manner, to cap and cover the end of exposed board edges The shorter leg of the Plastic J Section enables the profile to be easily hooked over the edge of the board and leveraged in place using the longer leg of the profile. We also manufacture and stock Plastic End caps for board thicknesses from 3 - 12, to view these profiles visit our Plastic Capping page.
Plastic C Section can also be known as Plastic Capping too and largely serves the same purpose as the J section. The legs on the C Section are tapered to provide a nice tight fit, ensuring the End Cap stays firmly in place.
Like Plastic J Section or End Caps, Plastic H Section can be called a number of different names. Listed on this page are also 2 different designs, Equal H Section and Unequal H Section or Butt Joint. Unequal H Section or Plastic Butt Joint is also known as H Joint Trim, Jointing Trim or Soffit H Joint. The longer back leg enables the Joint Trim to be drilled and fixed to any surface before the boards are then offered up into place using one profile. Equal H Section are where the legs on the profile are the same length, typically used in scenarios where the profile isn't fixed to a wall or surface. If you're looking for Plastic H Joints for thinner boards, they can be found on the Plastic H Section page.
To compliment the range of Plastic End Caps and Jointers we also manufacture corners for both 15 and 18mm Board. The Plastic L Section provides a sharp 90° corner whilst the Round corner provides a softer radius.
2 Part H Sections are an extremely popular jointing system for Board & Panel profiles. Used extensively in Healthcare, Commercial and Retail Fit outs, the bases are fitted to the wall or frame either mechanically with screws, tape or adhesive before the boards are offered up and the tops are push fitted into place. The barbed nature of the Base and Tops provide an extremely tight fit and are difficult to remove once on place. The profiles listed on this page are suitable for boards of thickness between 15-18mm but combinations for all board thicknesses are available on the 2 Part Plastic H Section page